Vizio Tv Won’t Turn On: What to do? [How To Fix] – Easy 2 Methods

There are innumerable stories of Vizio TV users who claim to have experienced this issue — some claim to have suffered with the problem for several years!

Fortunately, there is a very simple remedy that should cure around 80 percent or more of Vizio TVs that are unable to be turned on.

Vizio TV won’t turn on

A reset is required if your Vizio television will not power on. Unplug your television from the wall and let it a full 60 seconds to cool down. After the 60 seconds have elapsed, reconnect the power to your Vizio TV. This will soft reset your television, and it should be able to turn back on without issue.

Unplug Vizio TV from wall

The most frequent approach to get your Vizio TV to come back on is to unhook it from the wall socket, which may seem apparent, but it is the most effective.

Vizio Tv Won't Turn On: What to do? [How To Fix]

The most important thing to remember is to wait the whole 60 seconds. Take your time and wait until it has been at least a minute before plugging it back into the outlet.

This easy step enables the television to do a gentle reset on its own. This is not the same as just turning on and off the television using the remote!

Once you reconnect the TV, you should be able to see it power back up without any issues.

While this remedy should be effective in around 80% of situations, the other 20% may prove to be more difficult to implement. Check out the solutions listed below if you are still having difficulties getting your Vizio TV to switch back on again.

Remove batteries from Vizio remote

Unplugging and replugging your television did not resolve your issue, therefore remove the batteries from your remote control.

Make certain that both batteries are entirely removed from the remote.

After removing the batteries, press and hold the power button on the remote control for 15 seconds to turn it on. Do this for a total of 15 seconds once more! Instead of 5 seconds, 15 seconds are used.

After the whole 15 seconds has passed, replace the batteries in the remote and attempt to switch on the television. It should be able to be turned back on.

It is possible that any of the two actions above may resolve your Vizio TV power problem, but if you have the same problem again a few days or weeks later, you will want to consider factory resetting your TV for a more permanent solution.

Factory reset Vizio TV

When the TV is turned on (ideally, disconnecting it or removing the remote batteries was able to temporarily power the TV), press the Menu button on the remote control.

There should be a “System” option available somewhere in the menu; choose it.

Then look for the options “Reset & Administration” and “Reset TV to Factory Defaults.” Before allowing you to reset your Vizio TV, it may sometimes ask you for a code. The default code is four zeros, 0000, if this is the case.

Your Vizio TV will be returned to its default settings, which were the same as they were on the day you acquired the television.

Factory reset Vizio TV without remote

If, for any reason, you are unable to use your television’s remote control, you may still factory reset your Vizio television.

To do so, locate the power button on your television. Depending on the model you have, this may be located on the right-hand side, the left-hand side, or the very bottom of the unit.

Hold down the volume down and source buttons at the same time when the television is turned on. Several seconds later, your television will instruct you to push and hold the input button.

For at least 10 seconds, press and hold the input button on your keyboard.

This will turn off the TV, reboot it and factory reset it. The reboot and reset process can take about a minute or so.

Reseat power cord in back of Vizio TV

Remove the power cable from the back of the television, which is another very simple possible solution to your power issue.

Allow this to sit disconnected for about 60 seconds before plugging it back in.

It is important that the connection is secure when you plug it back in. A firm connection is essential in order to guarantee that the TV receives consistent power. If the connection is slack, turn it off.

Reconnect the power connection and turn on the television by pressing the power button on the television rather than the remote control!

The television should hopefully come back to life.

Select the Correct Input Source

Because of an improper input source, your Vizio TV may seem to be unable to be turned on. In order for your television to function properly, you must choose the appropriate input source.

If you’re using a streaming device, a DVD player, or a cable box, be sure that the source/input on your TV corresponds to the number of HDMI ports that are being utilised. In the example below, you would choose “HDMI 2” as the input on the television.

Vizio Tv Won't Turn On: What to do? [How To Fix]

You can select the correct input source using two different methods:

Method 1 – Enable Input Source using a Remote Control

  • Turn on your TV
  • Press the Source button on your remote control
  • Select the desired input mode

Method 2 – Change Input Source without Remote Control

  • Turn on your TV
  • Press the MENU button on the side or bottom of the TV
  • Use the volume button to navigate to the source option
  • Press the menu button to select the desired input source

Power supply replacement

The power supply of your Vizio television may be removed and sent in for repair if nothing else has worked so far and you truly want to retain your Vizio television.

Check to verify whether the standby light on your television is turned on before proceeding. If it is, this indicates that your power supply board is most likely operational and that this step may be avoided.

If you have no power and no standby light, it’s probable that your power board is faulty or completely out of commission. This might be triggered by a power spike, which is quite common.

Vizio televisions are notorious for having broken or weak power supply, but the good news is that they are just approximately $65 to fix (assuming you’re prepared to perform the job of removing it from the television yourself).

An excellent instruction on how to remove the power supply from a Vizio TV can be found at the link below.

Keep in mind that this procedure will take some time since you will need to remove every single screw on the back of the television in order to remove the casing and, eventually, the power supply.

The fact that it may not necessarily be the source of your power problems makes this a potentially dangerous approach. If you’re still prepared to accept the risk, here’s what you should do next:

Read More: How To Fix Controller Drift PS4 Without Taking Apart

Does a Vizio TV have a reset button?

Press the Menu key on the VIZIO remote control. System can be selected by pressing the Arrow buttons on the remote. Click on Reset & Administration. Make sure Reset TV is selected, then hit OK.

How do I force restart my Vizio TV?

Unplug your television first. Then, at your discretion, remove the power cord from the TV’s outlet or the back of the TV. Then, press and hold the TV’s power button for around three to five seconds, then release. Finally, reconnect the cable and turn on the television.

Why is my Vizio TV not restarting?

Leave the gadget unplugged for a few minutes after unplugging it from the power source. When you’re done, hold the power button down for around 30 seconds before turning it back on. The TV performs the necessary procedures to reset itself.

Why is my Vizio TV not responding?

Low batteries, a blocked TV sensor, remote and TV power residue, a dirty power supply, the remote’s stuck memory, or issues with the TV itself can all cause the Vizio remote to cease operating.

Conclusion

  • Remove your television from the wall outlet and wait 60 seconds.
  • To use your remote, remove the batteries from it and hold the power button for 15 seconds.
  • Whether you use your remote or not, factory reset your television.
  • Reinstall the power cable at the rear of your television set.
  • Check to ensure that your television is connected to the right input source.
  • Try connecting your television into a different power socket to see if it helps.
  • Send the power board for the television in for replacement.
  • Check the warranty on your Vizio TV.
  • Whether none of these repairs work, you may want to check your warranty to see if it is still in effect; otherwise, you may be forced to purchase a new television set.
  • Please let me know if this was successful in repairing your Vizio TV. If you have success trying anything different, please share your storey with me in the comments section below!
Bryan V. Root
Bryan V. Root
Articles: 460

Leave a Reply

Your email address will not be published.