How to Turn on Smartwatch without Power Button

Have you ever had a problem with your smartwatch’s power button not working? After a lengthy amount of time without use, a smartwatch’s power button will stop working. You may be perplexed as to how to activate a smartwatch if it lacks a power button.

As a consequence, we’re here to help you fix your problem and save you from losing your smartwatch forever. A wristwatch may help you keep track of your everyday activities and workouts.

It is possible to avoid problems with the watch in the future if you get acquainted with its basic operations. We want you to stay in contact with us so that we can provide you with more detailed information.

Reasons the Power Button of a Smartwatch Is Not Working

How to Turn on Smartwatch without Power Button

Smartwatches have become an increasingly popular gadget for those who like keeping up with the latest trends. There are a variety of smartwatches to choose from. Depending on the model’s battery capacity and display mode, these devices may last a long time.

It’s conceivable that your smartwatch’s power button may suddenly cease functioning.

  • Your smartwatch’s power button will cease functioning if you leave your phone unplugged for four or five days. Because of this, the timepiece won’t switch on. As a result, a large number of individuals believe they have permanently misplaced their timepieces.
  • When the power button loses its strength and efficiency, it doesn’t operate. It’s most common in low-cost smartwatches, but it may also happen in high-end models. Furthermore, if you continually pressing the power button in an erratic and unnecessary manner, you will eventually break the button.
  • The power button might be permanently damaged if it is pressed inadvertently due to lack of awareness. The fact that this occurs to so many individuals is astounding, yet it isn’t.

What are the Solutions of How to Turn On Smartwatch without Power Button

A power button is often included with a smartwatch. The watch may be turned on by pressing the button inside, and you’re good to go! There’s a lot to discover about your smartwatch right now. Smartwatches, on the other hand, have some serious drawbacks. Users are impacted by these difficulties. Using the power button often degrades the battery life of smartwatches, which are notoriously short-lived electronic devices.

As a result, your smartwatch’s power button may abruptly stop working. However, the gadget must be turned on first. In addition, you want to avoid losing your watch before it’s too late. Even if the watch’s power button isn’t working, you may use it to its full potential by turning it on.

It is possible to switch on a smartwatch without using the power button, using the following methods.

Solution 1: Checking the Guidance

Considering the variety of smartwatches on the market, you’re likely to find the answer to your question here. Some companies have the answer for every problem. Smartwatches are plagued by these challenges on a regular basis. It’s also typical for people to forget to switch on their smartwatches.

Many companies have taken the matter seriously and have begun providing a user guide to address it. A user may learn how to switch on a smartwatch without using the power button thanks to the guiding function.

Solution 2: Charging the Smartwatch

Many smartwatches fail due to the wearer’s inability to properly maintain them. Just as important as your phone, a wristwatch demands your whole attention. This is what happens when you leave your smartwatch uncharged for many days at a time.

When the watch’s power button is neglected, it also occasionally fails to operate. Put your watch on charge to get rid of this problem. When charging the watch, do not use an other method. To charge your watch, use the wireless charger that came with it from the store.

If the charger is properly attached to the smartwatch, it will turn on. You won’t have to press the power button this time around. Some time is needed for this to work. But if tapping the centre button doesn’t assist at all, this is a more dependable and less time-consuming method.

Solution 3: Go in Depth

It’s a bit of a shocker. Unfortunately, the charger isn’t able to recharge the smartwatch. This is an issue if your power button is also malfunctioning. When a coating of carbon is found in the copper plate of the watch, this problem occurs.

Because of this, the charger’s connection is unable to connect to the smartwatch’s charging pin. Because of this, the first step is to remove the coating of carbon. To solve this issue, you’ll need to dig deep and carefully follow our recommendations.

Step 1: Collect the Materials

At first, you need to collect the following materials to get started with the whole procedure.

  • Water
  • A little jar
  • Cotton
  • Toothpick
  • Cotton bud
  • The charger of the smartwatch.

Cotton and toothpicks aren’t needed since the cotton bud works just as well. Use cotton buds instead of toothpicks if you have them around the home. Because these materials are so widespread, they’re an essential part of every house. As a result, you won’t have any problems dealing with them.

Step 2: Dip the Cotton in the Water

You may now go on to the next phase after gathering all of the necessary supplies. To begin, you’ll need to add a little bit of water to the jar. If that’s the case, it’s preferable to use a cotton bud soaked in the solution. Take a toothpick and put a little amount of cotton on the end. After that, place the stick in the jar and stir it around.

Step 3: Rub the Copper Plate

Removing the cotton bud from the jar once it has been dipped is the next step. Start by rubbing the charging pins on the copper-plated connection. At the same time, you must massage it hard and precisely. However, use caution while touching the watch’s screen, since this might damage the watch’s display.

For around two or three minutes, try to massage the connection. Check to see whether you’re overusing water or rubbing too hard. There must be a balance between gentleness and the ability to do great things.

Step 4: Make the Plate Dry

After the copper plate is rubbed effectively with the wet cotton, you need to wipe the space. To make the space dry:

  • Take dry pieces of cotton first.
  • Wipe the extra wet space of the copper plate properly.
  • Wait for some seconds.

After that, the copper plate will be dry completely.

Step 5: Apply the Same Process with the Charger

Pins on a charger should also be cleaned before you plug in your smartwatch for charging. Dry cotton may be used to clean the pins of the charger that connect the watch for charging. Then, using a damp cotton bud, gently yet firmly massage the affected area.

Make sure the charger’s pins aren’t being damaged. Dry cotton may be used to clean the wet pins and allow them to dry fully for a few seconds before moving on. In order to remove the carbon coating from the charger pins, rubbing is required. Make sure you don’t miss this step in order to have a great outcome.

Step 6: Place the Watch on the Charger

In order to recharge your watch, you first need to clean and dry all of its pins. Make that the watch and charger connectors are correctly attached. Wait for a few seconds and observe whether the watch is charging or not at this time.

If everything goes according to plan, your watch should be connected to the charger and ready to go at this point.

Step 7: Repeat the Same Process

If the watch still does not seem to be linked to the charger, repeat the procedure. If you repeat the method 2 or 3 times, your watch will turn on. It’s important to remain calm and persevere during the whole process.

Read More: How To Change Clock On iPhone Lock Screen

Video Guide

How do I charge my smartwatch?

Connect with the wireless charger that was given with the watch. You can see it’s charging on the watch’s screen.

How do I restart my smartwatch?

Go top of the screen and swipe down tap setting, and go to the system. Scroll down and tap restart. 

Can you overcharge a Smartwatch?

Usually, it requires 2-3 hours charging until it is 100% charged. Leaving it charging overnight is harmful to the battery, so it’s better not to overcharge your watch. 

Wrap Up

If you want to keep up with the times in today’s modern world, you’ll need to be well-versed in the many gadgetry systems available. Aside from telling the time, smartwatches may now link you to a variety of other useful features that can save you time and make your life simpler. It has a plethora of advantages that compel you to utilise it.

People are always looking for ways to save time, especially in this day and age of technological advancements. Alternate ways to turn on your watch include using a power button that doesn’t function, as well as using a power button that does work. Alternatively, you may use the answer to How to switch on your smartwatch without a power button.

Bryan V. Root
Bryan V. Root
Articles: 460

Leave a Reply

Your email address will not be published. Required fields are marked *