How to Pair Plantronics Bluetooth Headphones and Earbuds

This article will walk you through the process of pairing Plantronics bluetooth headphones or earbuds with your smartphone.

If you already know which Plantronics bluetooth headphone model you have, you may refer to the sections below for instructions on how to connect them. When in doubt about the headphone type you are using, examine the packaging of your headphones, or check your invoice or order data (if you purchased your headphones online), and then go to the recommendations provided below.

How to connect Plantronics bluetooth headphones

After evaluating a large number of Bluetooth headsets, we discovered that Plantronics provides a wide range of excellent headsets, including the Voyager. As a result, this article will assist you with attaching your headset and getting started.

• Plantronics Voyager Legend Pairing
• The procedure will need you to wear your headset and turn it on at all times.
• The phrase “pairing” will be heard, and the headset indicator will begin flashing red and blue lights simultaneously.
• The time has come for you to connect your headset to your smartphone.
• Set your phone’s bluetooth settings to “search for new devices” by going to settings > bluetooth.
• Select “PLT Legend,” and if required, input four zeros (0000) for the passcode, or accept the connection to complete the transaction.
• Once you have successfully linked your headset, you will hear the voice prompt “pairing successful” and the headset indicator lights will cease blinking.

Plantronics Voyager 5200 UC Pairing

• Place your headset in pair mode by pressing and holding the Call button until you hear the words “pairing” and the headset turns on.
• The LEDs on the headset flash in red and blue light.
• Bluetooth should be enabled on your phone, and it should be configured to search for new devices.
• Choose “PLT V5200 Series” from the drop-down menu.
• In order to connect, enter four zeros (0000) as a passcode or accept the connection if required.
• You will hear the phrase “pairing successful” and the headset LEDs will cease blinking after you have successfully linked the devices.

Plantronics M70 Pairing

• Power on the headphones by pressing the power button until you hear “pair mode” and the LED light flashes red and blue.
• Activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On  |  Android Settings > Bluetooth: On > Scan for devices
• Select “PLT_M70”
• If necessary, enter four zeros (0000) for the passcode or accept the connection.
• Once successfully paired, you hear “pairing successful” and the indicator light stops flashing.

Plantronics Voyager Edge Pairing

• Make use of your headset and turn it on.
• You will hear the words “welcome” in all of the available languages, followed by the words “pairing” in your default language.
• The LED on the headset will begin to flash in red and blue.
• Bluetooth should be enabled on your phone, and it should be configured to search for new devices.
• “PLT Edge” should be selected.
• In order to connect, enter four zeros (0000) as a passcode or accept the connection if required.
• When a pair is effectively formed, the phrase “pairing successful” is heard.

Plantronics Backbeat Fit Pairing

• Power on the headphones by pressing the power button until you hear “pair mode” and the LED light flashes red and blue.
• Activate Bluetooth on your phone and set it to search for new devices.
• iPhone Settings > Bluetooth > On  |  Android Settings > Bluetooth: On > Scan for devices
• Select “PLT_BBFIT”
• If necessary, enter four zeros (0000) for the passcode or accept the connection.
• Once successfully paired, you hear “pairing successful” and the indicator light stops flashing.

Plantronics M55 Pairing

• To turn on the headset, slide the power switch to the on position. The LED flashes red and white to show that the device is in pairing mode.
• Bluetooth should be enabled on your phone, and it should be configured to search for new devices.
• Bluetooth is enabled in the iPhone’s settings > Bluetooth is enabled in the Android settings > Bluetooth is enabled Look for any gadgets.
• Select “PLT M25–M29” or “PLT M55” from the drop-down menu.
• In order to connect, enter four zeros (0000) as a passcode or accept the connection if required.
• When the pairing is completed, you will hear the phrase “pairing successful” and the indicator light will cease blinking.
• You may now make a phone call using the keypad on your phone or the voice dialling function on your phone.