How To Fix PS4 Error CE-41902-6

It seems that you have been trapped with a 500GB PlayStation 4, and you now want to expand your storage capacity using an external hard drive..

Likely you went out and purchased an external hard drive at the same time. This Error Code CE-41902 is shown every time you attempt to install a hard drive, though.

A issue with your external hard drive might cause the error number CE-41902 to appear. In either case, the hard drive contains less than 250 GB of storage space or a storage capacity exceeding 8TB, depending on the model.

But you don’t have to be concerned about that since I’ve been there and found myself seeking for a solution all over the internet. To receive your dose, just follow the instructions to the letter.

Therefore, put on your reading glasses in order to get the intended result.

How To Fix Error Code CE-41902-6 on PS4

For example, when you have completed all of the steps but are still receiving problems, I understand how frustrating it may be.

Basically, if you try to install your External Hard Disk on your PlayStation 4, you will get exactly three problems. If you connect the USB storage device to a USB hub, this error message may show from time to time.

These are the ones:

  • It is possible to get Error Code: CE-41901-5 if you have an External Hard Disk with less than 250GB of space or more than 8TB of space.
  • You will get the following error code: CE-41902-6. If you have an external hard drive that does not support USB 3.0, you may use this method.
  • If you do not connect the External Hard Disk Drive directly to your PlayStation 4, the error code CR-41899-1 will be displayed.
  • Consequently, before proceeding with the remedy, ensure that you have an External Hard Disk that is compatible with USB 3.0 and has a storage capacity that is between 250GB and 8TB in size.

Consequently, below are the solutions to these error codes:

1. Check all the Cables

Check that all of the USB ports on your PS4 are fully functional, as well as the cable you are using to connect your External Hard Disk Drive to your PS4.

If the connections are not functioning properly, you will be unable to install your External Hard Drive on your PlayStation 4.

How To Fix PS4 Error CE-41902-6

2. Clean all USB ports and cables

This error may occur when the ports get blocked with dust, which can happen from time to time.

A excellent habit to develop is to maintain your console clean at all times. If your console is coated in dust, there is a strong risk that it may develop a heating problem in the future.

As a result, keep your console clean at all times. With this procedure, you may also resolve the problem of the PS4 not turning on.

How To Fix PS4 Error CE-41902-6

3. Plug External Hard Disk Directly into PS4

If you connect the external Hard Disk Drive to the console using a USB hub, the external Hard Disk Drive will not be recognised by the console.

Consequently, make certain that the External Hard Disk Drive is directly connected to the PlayStation 3.

4. Install External Hard Disk Drive

Insert your Hard Disk Drives into the PS4 as firmly as possible yet as fast as possible. If the Hard Drive is not recognised by the console, try plugging it in and out numerous times.

If you take an excessive amount of time connecting it in, the console will recognise it as a USB 2.0 device.

How External Storage Works on PlayStation

There was a time when 80GB of available storage space for gaming was plenty. I mean, it seemed like a lot at the time!

But then came the dawn of a new age in video gaming. Now, a single game may use up to 100GB of space!

Also, if you’re a Call of Duty player that plays on a regular basis, best of luck to you, dude. I’m sure you’re crying yourself to sleep due of the colossal number of updates.

We are all aware that SONY has been quite restricted with their goods. It is not possible to just purchase a third-party product and get access to their ecosystem.

However, since the PS4 only came with 500GB of storage, gamers were in desperate need of a solution. When you consider how much space a game presently takes up, this is a significant reduction.

Then there was the 4.50 update! This provided us with our first introduction to the new storage system. Correct the error “default gateway not accessible” as soon as possible.

Your External Hard Disk may now function as a storage device on your PlayStation after the installation of the update.

Using this feature, you will be able to download games, applications, and backup data to your external hard drive.

This is a significant advantage for players. At the very least, individuals who possess the 500GB PlayStation 4 will benefit from this.

With this feature, you can even carry the games in tiny storage and play whenever you want.

How to Install External Storage on PS4

As previously stated, you will need a USB 3.0 compatible external hard disc drive to complete this task. Anything less than that will not be effective.

  • Plug in your USB 3.0 supported external Hard Disk Drive on your PlayStation 4. It would be better if you plug it in your right USB port.
  • Go to settings from Play station Menu and then go to Device.
  • Click on USB Storage Devices.
  • Select Your External Hard Drive.
  • Format the Hard Drive.
  • Go to Storage.
  • Click on your External Hard Drive.
  • Set your Hard Drive as Application Install Location.

Video Guide

Final Thoughts

It is pretty annoying to face these silly errors and especially gets pretty hectic when it comes to gaming.

Hopefully, with this guideline, you can solve your problem.

And if you have any more queries, you can always reach us.

Leave a Reply

Your email address will not be published.