How To Fix Controller Drift PS4 Without Taking Apart

We are here to tell you How To Fix Controller Drift PS4 Without Taking Apart? Do you have a PlayStation 4 console that is experiencing issues with controller drift? When you are in the midst of a game and your character begins moving on its own, this may be a significant issue for you, particularly if it happens often. In this article, we will go through how to correct controller drift on PS4 without having to disassemble the machine. In addition to this, we will provide some advice that may be used to stop controller drift from occurring in the first place.

Causes of PS4 Controller Drift

If your character or the camera continues to move even when you are not holding the controller, analogue stick drift is most likely the root of the issue. Drift on the PS4 controller may be caused by one of two things:

• The analogue stick has become soiled.
• It is possible that the analogue stick or the potentiometer is broken.

Due to continuous usage, you can anticipate some normal wear and tear. Alternatively, if cleaning the controller does not resolve the issue, you might consider having your controller replaced or fixed rather than dismantling and reassembling it.

How to Fix PS4 Controller Analog Stick Drift

Once you have ensured that your controller is switched off, proceed with the instructions outlined below until it is functioning correctly.

• Reset the PS4 controller to its factory settings. Resetting the DualShock 4 may resolve a variety of difficulties that may arise unexpectedly. If a soft reset does not provide results, a hard reset should be attempted.
• Maintain the cleanliness of your PS4 controller. Gently clean the analogue stick’s nooks with a dry microfiber towel to remove any dust or debris. A cotton swab soaked in a solution of water and isopropyl alcohol can effectively remove filth off the surface of the skin. In the event that you see dirt that you can’t reach, you may utilise pressured air to move it.
• Sony will repair or replace your PS4 controller if it is defective. If your controller is relatively recent, it is possible that it is still covered by the manufacturer’s guarantee. To determine whether you qualify for a free repair or replacement, go to the PlayStation Repair & Replace website, choose DualShock 4, and then follow the on-screen instructions to see if you qualify.
• In order to clean the analogue stick on your PS4 controller, disassemble it. If you want to thoroughly clean the controller inputs, you must first remove the outer case and then raise the battery in order to have access to the motherboard. Make use of a cotton swab and a solution of water and isopropyl alcohol to clean the area. Do not use compressed air on the inside surfaces of the vehicle.
• The analogue sticks on the PS4 have been replaced. If you have the proper equipment and are prepared to put in the effort, you may attempt to replace the analogue sticks and the potentiometer on your game console (the sensor for the analogue sticks). In addition to the components, which can be purchased online, you’ll need a soldering iron to complete the project. Unless you have the time and resources to install it yourself, purchasing a new controller is the most cost-effective and convenient option.

How to fix controller drift ps4 (NO TOOLS)

Video Guide