How To Connect Audio Mixer To Video Camera – 5 Procedure

An audio mixer may improve the sound quality of the audio that is sent into the camera via a microphone. Once again, you have the option of recording numerous audio inputs at the same time. YouTubers, DJs, singers, and other professionals utilise the mixer to capture videos while simultaneously including more than one audio track. If you want to start a YouTube channel, you should consider using an audio mixer in conjunction with your digital SLR camera.

If you want to start a YouTube channel, you can simply link a good camera for YouTube to an audio mixer blender with your DSLR camera if you have one.

Throughout this post, you’ll discover clearly stated processes and techniques to assist you in connecting your audio mixer to a video camera with confidence. The procedures are clearly laid out. The solutions to the commonly asked questions are also underlined in the next section to aid with comprehension. To get the greatest outcomes, pay close attention to the instructions. Make sure to consult an expert when the situation calls for it.

Methods Of Connecting An Audio Mixer To The Video Camera

The Audio Mixer Method

How To Connect Audio Mixer To Video Camera

With the help of an audio mixer, you may increase the clarity of the incoming signal. It is possible to record several audio sources at the same time once again. The mixer is utilised by YouTubers, DJs, singers, and other musicians since while recording videos, more than one audio track must be input. If you want to start a YouTube channel with your DSLR camera, you need invest in an audio mixer for the camera. It is possible to connect good YouTube cameras to a sound mixer.

The Procedure Of Using The Audio Mixer Method

The audio mixer does have the ability to input various audio streams. However, without any mixers, the cameras may play or record stereo audio on a single channel. You must thus follow these steps:

How To Connect Audio Mixer To Video Camera

Procedure 1

To use your microphones as camera inputs, you must acquire an XLR connector for each microphone you want to use. Using this method, you can attach the mics to the DSLR more easily. To build a single quarter-inch cable, gather two 3.5-millimeter stereos and connect them together. You may also utilise any audio input device in this area. However, more wires are required.

Procedure 2

Assume you are a frequent user of a dynamic microphone. Purchase of a male or female XLR cable, as well as the purchase of a 1/4 inch XLR for the microphone input, would be beneficial. Additionally, this will aid in the recording of the audio.

This will be especially useful when you are sharing or recording a podcast since it will allow you to better appreciate the sound quality once everything has been changed. Finally, you’ll want an additional piece of equipment: a 0.75-inch to 3.5-mm converter, for example. This enables you to connect the output of your headphones to the computer.

Procedure 3

You now have complete control over all of the goods or tools at your disposal. The microphone should be connected to the inputs of your microphone once it has been taken. Some audio mixers include preamps, such as number 1 or number 2, that are used to input the microphone jack. Then, using the two 3.5-millimeter multifunctional quarter-inch cables, connect the phone to another port on the computer.

Procedure 4

Let’s go to work on something more important. Twin quarter-inch mono wires are used to connect your camera to your computer through 3.5 mm. This is the main output that has to be connected to the camera’s microphone input on the other end.

In the event that your cameras only have a single microphone input option, the possibility of an audio equalisation is decreased. As a result, you may need to make some adjustments. The camera is unable to cope with a louder level of input from the sound mixer.

Procedure 5

To begin the programme, set all of the inputs to zero or neutral except for one. The fact that the input level may be altered to the right level eliminates the need for this. The main mixing dial is used to enhance the levels of all input signals. This is unquestionably included in the same time frame as the balanced input.

It is possible that your videos may begin to record. All of the movies will be taken with your camera at the same time, including the sound from your smartphone, microphone, and so on. Every input will be recorded on your device.

By connecting your smartphone to your Audio Mixer, you will be able to test the settings, listen to audio files on your smartphone, and control the camera device. If everything goes well, you may be certain that you have appropriately connected the audio mixer to the video camera.

Video Guide

How Can One Record House Sound For Video Recording To Get Good Clean Audio?

Using a 1-meter shielded audio cable, connect an AUX SEND port (mixer) to the “signal inputs” port on a direct box. The input port of the microphone is linked to the XDR signal outputs (direct box) via a 1 to 2 m cable.
A stereo receiver and headphones are the next steps. Wait for the signal to emerge before making a judgement on its clarity.
Never start your live event with a shaky setup. Once everything is connected and configured according to the instructions, you may begin making some test recordings using the mixer and phoney audio material.
When you’re done with the video, transfer it back to your computer and use your favourite media player to listen and check out the audio. The signal may be amplified or tamed using the gain control on the AUX SEND port’s volume level.

How Should One Create A Second Digital Audio Simultaneous Recording Utilizing A Mixer Feed?

A digital CD recorder from Tascam may be connected to a single line in the same way a tape recorder was. Alternatively, you might use a small digital voice recorder from Olympus, Sony or Panasonic. $50-$100.
Check to see whether the microphone you get has a LINE LEVEL or MIC LEVEL switch on it. Link the DVR from the mixer to a recording outline when the microphone is set to LINE LEVEL. Then, as soon as the event is about to begin, begin recording it on your DVR. After that, it’ll simply sit there and record everything that goes through it.


XLR to 1/8′′ converter output levels may range from 0dB to 30dB, which overloads the camera micro input. This is mostly dependent on the mixer. If at all feasible, wireless should be avoided since it will always lower the quality of the sound. To get from low-z (XLR) to high-z (TRS), you need a transformer, not an adaptor. Always keep in mind that the SD card of the camcorder normally records every output. The most common approach is to employ an audio mixer.

You should listen to some music once you’ve connected all of your devices. In order to listen to your music, you must be able to hear the audio’s soundtrack. Check for loose connections or retry the connection if you’re having trouble hearing the noises. Contact a professional if the connection still does not function for you. If you’re looking to save time and money, hiring an expert is a good option.

Bryan V. Root
Bryan V. Root
Articles: 460

Leave a Reply

Your email address will not be published. Required fields are marked *