304 North Cardinal St.
Dorchester Center, MA 02124
As a general rule, if the remote for your Firestick blinks orange, it cannot connect to your device.
Keep an eye out for clues as to what’s going on and how to fix it.
We’ll look at all the possible causes of the orange blinking light in this post and try to restore things to normal using several tried-and-true methods.
When your Firestick remote’s orange flashing light stops working, try a power cycle or a factory reset as a last resort.
After that, we’ll show you how to couple your remote since it’s flashing orange if it isn’t paired.
To support you along the way, we’ll also be providing you with some useful advice and suggestions.
There is a pulsating orange light on the remote of your Firestick indicating that it has entered discovery mode.
To be clear, while your remote is in “discovery mode,” it is hunting for a Firestick to which it can connect.
First, you should attempt re-pairing your remote to see if it’s been unplugged.
The remote may not pair with your Firestick if you’ve recently suffered a spike in power or have attempted to connect it with another Firestick.
Even if you don’t need to pair your remote, you may have to, so here’s how to do it correctly:
When you’ve successfully linked your smartphone, you’ll see a blue light on your device. Using this method, you’ll be able to tell when your Firestick remote is functioning.
You should proceed with our troubleshooting procedures if your Firestick 4k remote continues to flash orange even after a clean pairing.
Here, we presume that you were unable to manually connect your remote to the Firestick, therefore we’ll continue with some tried and true troubleshooting methods.
Once you’ve tried each of our suggestions, check whether the problem has been resolved.
The firestick and any other electrical gadgets should not be too near to your remote control.
Since a last precaution, ensure sure there are no other devices surrounding the Firestick’s pairing receiver, as wireless gadgets have been known to interfere with it.
Make sure there are no Bluetooth devices attached to your Firestick that might be interfering with your remote pairing capabilities by disconnecting them.
The remote you’re using for troubleshooting should not be linked to another Firestick or FireTV in the house.
A Firestick remote that is glowing orange is a telltale indicator of depleted batteries.
When the batteries are running low, the remote will be unable to perform basic activities like pairing, as shown by the flashing orange light.
Open the battery compartment and experiment with the batteries’ placement; you may even try putting them in various slots (if possible).
Then follow the manual method above to pair your remote with the Firestick, and if your remote connects this time, your batteries are almost dead and you need a new one.
If however, your issue is still there, it is still highly recommended to install new batteries, so you can tighten the circle of possible causes right away.
If even brand new batteries do not help with the flickering orange light, with our next method we will take our troubleshooting one step further.
To restart a Firestick, just disconnect it from the power source and wait around three minutes before plugging it back in.
It is possible that your remote will be able to establish a healthy connection when this procedure is completed.
Our next approach is needed if the orange light is still flashing after recharging your firestick and manual pairing fails.
If you are here and none of the previous methods seems to have made any difference with the Firestick remote blinking in orange, we really recommend going back and giving our methods another shot.
If you are certain that nothing helps you can factory reset your Firestick remote.
Follow the steps below to ensure a proper factory reset.
When attempting to link a second Firestick remote with one that is already paired and functional, you may get a flashing orange light.
A step-by-step tutorial on how to add a second remote to your Firestick will be provided here if your first remote isn’t working.
If you want to be sure you’re doing everything correctly, we suggest following our instructions.
For Android and iOS devices, you may utilise the Firestick remote mobile app.
You may utilise your smartphone as a Firestick remote with all of its features with the help of this software.
Even if you’ve tried all our suggestions and your remote is still flickering orange, we’ve narrowed the field sufficiently to determine that the problem is with either your remote hardware or the Firestick itself.
If the problem persists, we consider connecting a different remote that has been shown to function.
If you’re still having issues, you’ll need to get in touch with the company’s customer support to get more information about what’s going on.
It’s reasonable to say that the Firestick remote blinking orange has a plethora of potential fixes.
After reading this article, even if you weren’t able to solve the problem, you will know what to do next, or at least save you a lot of time.
Make sure to check out our blog if you’d want to learn more about how to implement technological solutions.