Physical Address
304 North Cardinal St.
Dorchester Center, MA 02124
When you set up an alarm on your iPhone, you may adjust the level of the sound you hear when you wake up. The ringer volume, on the other hand, controls the loudness of your iPhone’s ringtones and alerts.
It would be beneficial to separate the two, however iOS does not enable it at this time. The level of sounds may be modified by heading to Settings > Sounds & Haptics and changing a single parameter.
The “Change with Buttons” option will be available to you there. Pressing the volume buttons on the iPhone will have no effect on the loudness of ringtones and notifications if this is turned off. Pressing the hard buttons to adjust the phone’s volume is possible if the green toggle is enabled.
Regardless of whether the hard buttons are enabled or not, alarm and ringer volume are still tied together in a single setting on iPhone. There are, however, separate settings for music, video, and other volume levels.
Contents
The iPhone’s ringer and alarm volume can’t be adjusted independently. The app store does provide third-party alarm clocks, though. Changing the level of your alarm is easy with apps like Night Stand Control.
The top 5 best apps for alarms for iPhone are:
You can set the volume for alarms and ringers by going to Settings > Sounds & Haptics. There are two options:
The iPhone’s hard volume buttons may be used to change the level of all of your iPhone’s noises, including alarms, ringers, music, movies, and more. You can now expect your call volume and alerts to be set to the same volume as the video you are now viewing if you reduce the volume and do not modify it.
Except for alarms and ringers, you may change the level of any noises by pressing the hard volume buttons. Changing the volume of music, film, or other media using the hard buttons will have no effect on the alarm or ringer. There is no need to worry about the ringer or alarm going off at a lower volume.
There are two ways in which your ringer volume influences your alarm loudness, depending on your settings.
“Change with Buttons” is disabled by default in the Sounds & Haptics menu. Ringer volume and alarm volume may be set up as a single unit when this is the case. Because both your ringer and your alarm have the same default level, you can’t modify it until you go into the settings.
While this feature is switched off, the volume of your device’s ringer, alarm, and music will be controlled via the volume controls on its left side. As a consequence, all noises are playing at the same loudness at the same time.
In this case, for example, if you reduce the level for phone calls throughout the day and forget to adjust it later, your alarm volume may not be loud enough to wake you up in the morning.
There are a few steps you can try to fix the issue:
Apple’s iPhone X, iPhone XS, iPhone XR, and the upcoming iPhone 11 and 12
You can forcibly restart your iPhone by pressing and fast releasing the volume buttons, then pressing and quickly releasing the volume down buttons, then pressing and holding the side button until the Apple logo displays on the screen.
For Phone SE, iPhone 8, 7 or lower:To force restart your iPhone, press and hold your home button and the side button at the same time until the Apple logo appears.
On your iPhone, go to Settings > Sounds & Haptics.
Attention Aware features in the iPhone X and newer iPhones automatically change the volume.
Using the slider in Settings > Face ID & Passcode, choose “Attention Aware Features” to deactivate them.
Using the volume buttons on the left side of your iPhone, or the “Change with Buttons” option in your Sounds & Haptics settings, you may change the alarm volume manually. This feature is only available if “Change with Buttons” is off in your Sounds & Haptics settings.
A typical cause of a missed alert is that the volume has been muted, which is the most prevalent cause. Go to Settings > Sounds & Haptics and raise the level using the slider to verify and alter this.
If you don’t snooze or switch off your iPhone alarm, it won’t go off on its own. After 15 minutes of continuous ringing, the phone does take a 90-second break. You will get a notice during this 90-second time, and the iPhone alarm will sound again thereafter.
The Attention Aware Features may be at blame if your iPhone’s alarm goes off in a high-pitched tone and then fades out. After the first loud ring, this clever function detects that you’ve picked up and glanced at your phone. Because it knows you’re awake, it decreases the loudness of future rings.
Use the “Attention Aware Features” slider in Settings > Face ID & Passcode to disable this function.
Turn on Do Not Disturb Mode to silence everything except the alarm. Swipe down from the top of the screen and click on the Moon symbol to do this. A selection of alternatives will emerge if you press and hold it.
The volume controls can’t be turned off fully. Only the ringer and alarm sounds will be affected if you do this. Turn off “Change with Buttons” in the Settings > Sounds & Haptics section.
It’s possible to establish a maximum volume level for your music by heading to Settings > Music and utilising the “Volume limit” slider. Its primary purpose is to safeguard your ability to hear.