Can A Fitbit Battery Be Replaced?

So, you’ve been using your Fitbit for a while. Your Fitbit has served you well, but the test of time has come and gone, and it’s time to say goodbye. You’re here because you want to know whether your Fitbit’s battery can be changed, and we’ve got the answer.

Can the Batteries in My Fitbit Be Replaced?

Technically, the answer is no; nevertheless, in practise, the answer is yes. If you’re feeling a little perplexed, you’re right. In order to change a Fitbit battery, the process is more complicated than necessary.

Unfortunately, Fitbit batteries are difficult to replace. There is a good probability that your Fitbit will be out of warranty when its battery dies, so you won’t be able to get a new one.

You may be eligible for a discount on a new Fitbit by contacting the company’s customer service department. It’s not perfect, but it’s better than nothing.

It’s worth noting that a tech store can do this service for you, but it will cost money, and it’s probably less expensive than purchasing a new watch.

Read on if you’re not interested in paying. Fitbit battery replacement will be covered in detail. Things are going to become difficult.

How to Change My Fitbit Battery

In other words, this is a hazardous and difficult proposition. It necessitates dismantling your watch and tinkering with its internal mechanisms. Don’t put yourself at danger if this is something you aren’t comfortable with. Hire an expert to do it for you instead of doing it yourself.

These instructions are for the Fitbit Charge HR, but they should work with any other Fitbit model. These instructions may not always work, and it is possible that you may need different batteries for various models.

What You’re Going to Need:

  • Some bits of random plastic to separate the band
  • Torx driver
  • A new battery
  • A soldering iron

First, You Have to Separate the Electronics Casing From the Fitbit’s Band:

  • To begin, take out the four Torx screws from the band’s inside.
  • Remove the housing from both sides of the band. If you don’t have a blade, you may use a pair of scissors or two pieces of plastic. Using too much effort here might damage the assembly, which has been slid into position.
  • The circuit board must now be removed from the electronic housing. Remove the two screws that hold the circuit board in place using your Torx driver. To remove the board, begin by prying it out with care, making sure that no components are damaged.
  • The batteries must now be removed from the circuit board, and a fresh battery must be prepared.
  • The next step is to smoulder. We suggest that you tape the circuit board down while you’re working on it since it might be difficult to smoulder it while you’re holding it.
  • Then, smoulder the new battery into position on the circuit board where the old one was removed.
  • Before removing the old battery, splice both wires. The circuit board will not short out as a result of this.
  • Check to see whether everything is operating properly once you have changed the battery.
  • Charge the device for roughly 30 minutes by plugging it in to a power source. See whether it’s functioning if you unplug it and check.
  • Afterwards, reassemble your gadget. ‘ Assemble the circuit board with the electronic case by screwing it back in.
  • Assemble the case back into the band, taking care not to do any harm. Returning it to its original position should be as simple as a snap.
  • Replace the band’s electrical housing.

At this point, the job is complete for you. Everything should be OK if you’ve done everything right! As a result, you may be forced to purchase a new one.

If you’re going to do something, be sure you’ve got the proper equipment and training. It also violates the warranty of your gadget. As a result, you’re better off simply getting a new one while it’s still covered by the original warranty.

It is possible to hire a tech shop if you are not sure in your ability to do this task on your own.

However, it’s possible that you won’t need to get a new battery at all. Before doing this method, you should try the following first.

How to Maximize A Fitbit’s Battery life

  • Minimize the alarms you have on.
  • Turn quick view off.
  • Try to avoid using music control when you can.
  • Use less Fitstar workouts.
  • Reduce brightness.
  • So, you sort of can, and sort of can’t change your Fitbit’s battery. Hopefully, this guide has helped you out.

If you’re not comfortable doing it yourself, you may always hire a tech company to handle it for you. It’s an additional expense, but there’s a good possibility they’ll perform a better job than you would.

If your Fitbit is still under warranty, you may contact Fitbit to request a replacement. If you like, you may get in touch with them and ask for a discount on a new watch.

Even if you don’t want to dismantle your Fitbit with a screwdriver and soldering iron, there are plenty of methods to avoid battery replacement.

How long do fitbit batteries last?

The battery life of a Fitbit may range from five to seven days on a single charge. This is obviously dependent on how often you use the Fitbit as well as the type and age of the device. However, if your Fitbit battery cracks or dies, you may need to buy a new one. That isn’t a very frequent problem, to be honest.

Why won’t my Fitbit hold a charge?

If your Fitbit device does not hold a charge, Fitbit recommends the following: Clean the charger contacts. Try charging from a different USB port. Try charging from a computer USB port instead of a USB hub.

Why is my Fitbit battery dying so fast?

Turning on the “always-on” feature and GPS through the Fitbit mobile app is the reason your battery life is draining faster. This is allowing your watch to constantly display your screen and track your location even when you are not using it at the moment

Bryan V. Root
Bryan V. Root
Articles: 460

Leave a Reply

Your email address will not be published. Required fields are marked *